FS17 – UAL Marshall BC-32 Bretter Paletten Trailer V1.1

UAL Marshall BC-32 Bretter-Paletten Trailer mod for FS17. Changelog of the UAL Marshall BC / 32 - Boards optimized - version 1.0 (The mod was extensively tested in the SP and on the Dedi and the log is error-free). * Boards for the sawmills added or optimized. * Automatic loading of bales, pallets and boards. * UAL trigger widened, so you do not have to go so close to charging. * Worker extension wider tires. * Factory extension colored rims. * Loading area widened. * Ablademakierung blue colored and the white background removed, thus it acts properly noble. ;) * Unloading page selectable: * Washable, tire dust, unloading side selectable. * Illumination (reversing light, tail light, turn signal, brake light, all-round warning light). * 100% Multiplayer and Dedi compatible. Short instructions and explanations: The Marshall BC / 32 can load up to a maximum of 8 deck pallets. However, it is basically overcharged for the weight of the pallet pallets, so the recommendation is for 4 to 6 board pallets. And why was the possibility of a maximum of 8 boards palleted? Well, because it should be bit as in the reality, because there is not synonymous not everyone and always to the specifications for the permissible maximum total weight. ;) Just as a hint, if you want to load 8 boards. After you have loaded the boards, you have to press z as usual for final charging. However, if you have loaded 8 boards, they are slowly slipping back from the trailer because of the overweight. Here are two ways to counter this: 1) After charging the 8 boards, press the Z key and immediately press the L key. The whole thing has to go fast, so that the boards pallets have no chance of slipping off the trailer. 2) After loading the 8 boards, press the L button and DO NOT press the Z button. The tensioning straps are then placed under the boards, but the weight of the boards is not used and it runs as if The hanger would be empty. I know this is less real, but whoever wants to do it can do the same. ;) The UAL Marshall BC / 32 can be found in the shop not under bale technology, but because of the optimization of the boards under the category forestry equipment. The required keys (Y, X, Z, L and B) are displayed in the F1 menu. Key Y = Selection of the load. Button X = On or Off the automatic charging process. Key Z = Function 1: After recharging to place the load on the trailer (real weight). Button B = Select the unload side. Key Z = Function 2: After selecting the unload side with the B key, the key Z can be automatically unloaded.

Credit(s):
Pandahma

DOWNLOAD(Mirror Server #1)

You may also like...