Weidemann 4270 Cx 100T V1.0.1.0 mod for FS17.
Update 1.0.1.0
- Lua Cabin Controls fixed in relation to mrGbMS
- Added interior camera to the seat suspension
- Adjusted decal positions
- adapted to front wheels position
- Front wheels now have collision boxes
- removed unnecessary temp file in mod
- Corrected the IC button on the left door
- Pedals should not move anymore when standing outside the vehicle
- Steering speed slightly increased
- Work lights revised (order and buttons)
- 2 compressed air connections for TrailerAttacher
- Parallel guidance added
- Added missing shop descriptions of all tools
- Facelift versions now have reversing light
- Door opening angle corrected
- Added another facelift version
- Ball Fork now has an Attacher
- Front loader Attacher collision corrected
- light color slightly adjusted
What was done fundamentally:
- mod converted and completely brought to LS17 standard
- partially decomposed objects so that color choice / dirt is possible (many parts had previously permanent)
- Disassembled other objects to make for example windscreen wipers individually animatable
- specially developed script to show the positioning of the FL-arm / swingarm
Previous functions (shop):
- wheel config
-> 750 60R30.5, Nokian, 400 70R20 ### all in each case as forestry edition (marked by "F") and in each case as a rear wheel or all-wheel drive (2WD / 4WD)
- color config
-> Standard Weidemann red + full range
- Wheel color config
- Cabin configuration
-> open, closed, closed forest edition (lamp protection grille + windscreen protection)
- Disk configuration
-> normal or tinted
- Engine configuration
-> 3 performance variants (75-122PS) as 20km / h (S standard) or 30km / h (E-Extended) variant
- Fender Config
-> with the without front fender
- Extras config
-> without, with working cameras, with FL-Kontrol monitor or both
- Attacher Config
-> Weidemann-Attacher, Telelader-Attacher or FL-Attacher
- LightBeam Config
-> with or without particle effects in the light
- ConditionConfig
-> used, new, facelift (Kramer), facelift2 (JCB)
Previous functions (general):
- Windscreen wipers can be activated in the rain
- Indicator lever animated
- Joystick responds to control of the arm and swingarm
- animated various indicator lights in the interior
- Console only returns after boarding
- Warning lights when reversing (based on real example)
- Time-dependent headlight particles
- adapted exhaust particles
- MR Support
- Seat suspension
- DynamicHoses support (only on the boom and crocodile bit / silage cutter)
- Handbrake Mod Support
- OilChanger Mod Support
- InteractiveControl
Additional tools (all in old and new available):
- Large bale fork (foldable and additional frame that can be purchased)
- Crocodile Bite (2500L)
- dung fork (1800L)
- pallet fork
- Shovel (2000L)
- Silage tongs (2250L)
- 500kg weight
Note about some shop configs:
- In the Forestry edition of the wheels, chains are mounted.
These have no further effects and are purely visual
the different engine variants E and S have different maximum speeds,
the speedometer in the cockpit does not react to the difference unfortunately
- The FL control monitor uses a pointer to show the current angle of the rocker
(not the device what is attached) and as a bar the current lifting height
- The work cameras are once installed in the swingarm and once at the rear as a rear view camera.
Depending on the attached tool, the camera setting may not be optimal.
Credit(s):ingaming/textures/animations/etc: HoFFi
3D work: gunthaa aka RedCat 3D, TSM and HoFFi
scripts: LoogleCZ, Ifko[nator], Michi77, xentro, upsidedown, mogli, Manuel Leithner, modelleicher, raffnix, sven777b, HoFFi
testing: moddingwelt, Gnom Atom
social media: Pixelfarming, Gnom Atom, SF Henry, SirJoki, Snu
File Detail: 51.1 MB / ZIP
DOWNLOAD(Mirror Server #1)
